Filter
Top Products
32 Magellan SporTrak
Working with Routes
Creating/Clearing a GOTO
A GOTO is a route that guides you from your current
position to any waypoint in the receiver’s memory. As an
example, you can save a waypoint at your home. No matter
where you go, you will always be able to navigate back home
by using GOTO.
To create a GOTO
To clear a GOTO. The CLEAR GOTO function allows
you to delete an active GOTO route.
If there are no active GOTOs, the CLEAR
GOTO will not be displayed in the MENU.
Creating GOTO on the Plotter Screen
A GOTO route can be created by selecting a waypoint on
the plotter screen. While on the plotter screen, follow this
procedure to access PAN-N-SCAN and set a GOTO by:
Figure A. Your
menu may differ
depending the
waypoints in
memory.
GOTO
MOB
USER
STADIUM
GOLF COURSE
HALL
By selecting the
GOTO destination
waypoint from the
plotter screen, you
can avoid selecting
the wrong
waypoint if its
name is shared
with another
waypoint.
When the crosshair is over the waypoint icon, the
waypoint name is displayed at the top of the screen.
Select
waypoint
FIG
.
A
Select
category
Select
CLEAR GOTO
Move
crosshair
From PLOT
screen
Select
PAN-N-SCAN
Select
yes or no