Filter
Top Products
38
Traffic
Enabling Live Traffic
This option is used when you want to turn traffic off. (Traffic information is available only after purchasing and
installing the Traffic Link accessory.)
1. From the Main Menu screen, tap the Settings icon.
2. Tap Traffic.
3. Checking Enable Live Traffic allows the receiver to display received traffic information.
Enabling Predictive Traffic
1. From the Main Menu screen, tap the Settings icon.
2. Tap Traffic.
3. Checking Enable Predictive Traffic allows the receiver to display predictive traffic information.
Showing All Traffic Events or only Traffic Events along your route.
This option is used to set whether you see all traffic events or only those along an active route. (Traffic
information is available only after purchasing and installing the Traffic Link accessory.)
1. From the Main Menu screen, tap the Settings icon.
2. Tap Traffic.
3. Tap the Traffic Events button in the middle of the Traffic Options screen.
Enabling Voice Recognition
1. From the Main Menu screen, tap the Settings icon.
2. Tap Voice Recognition.
3. Checking Enable Voice Recognition turns on the voice recognition function permitting you to access some
functions with voice commands.
GPS Options
Setting the GPS Position
It is useful to set a GPS position if you are not receiving satellite information quickly due to travelling over 800
km/500 mi with the Magellan Maestro receiver turned off. Setting the GPS position will allow the Magellan
Maestro receiver to compute which satellites are available and calculate the position more quickly.
1. From the Main Menu screen, tap the Settings icon.
2. Tap GPS Options.
3. Tap Set GPS Position.
4. Use the same search methods (address, POI, Coordinate, Previous, etc.) as you were selecting a destination.
Viewing the GPS Status
1. From the Main Menu screen, tap the Settings icon.
2. Tap GPS Options.
3. Tap Status.
(Optionally you can tap on the satellite signal indicator in the upper right corner of the OneTouch screen to
access the GPS Status screen.)