Filter
Top Products
31
Bluetooth
Please note that not all of the features of the Magellan Maestro Bluetooth will work with all phones as features of
cellular phones vary from manufacturer to manufacturer.
Pairing your Bluetooth-ready Phone for the First Time
Before you use the Bluetooth function of the Magellan Maestro receiver you must pair your Bluetooth-ready
phone to the Maestro. A list of compatible phones can be found on the Magellan web site at
www.magellangps.com/support. Before beginning you should have the instructions supplied with your phone
for questions about accessing the Bluetooth pairing mode for your phone.
1. From the Main Menu, tap the Bluetooth icon .
2. Tap Yes to begin pairing your phone.
3. Enable Bluetooth on your phone. (See instructions supplied with your phone for any questions.)
4. On your phone, begin the searching for Bluetooth device function.
5. Select the Magellan 4700 from the list of devices found.
6. The Bluetooth phone will begin communicating with the Magellan Maestro. When prompted, enter ‘1234’
as the passcode on your phone.
7. Your phone should ask to connect to the Magellan Maestro. (If not, refer to your phone manual for
connecting to a Bluetooth device.)
8. When connected, the Magellan Maestro will ask if you want to accept the connection. Tap Yes.
9. Phone connected successfully! screen appears if the connection is successful. Tap OK.
10.You may now import contacts from your phone. Tap Yes to begin importing. (If you choose not to import
your contacts now you can do so later from the Bluetooth Settings menu.)
11.You may need to confirm on your phone to accept connection from the Magellan Maestro.
12.When the contacts have been successfully imported a confirmation screen is displayed. Tap OK.
13.The Bluetooth Settings screen is displayed.
Bluetooth Settings
Accessing the Bluetooth Settings
1. From the Main Menu, tap the Bluetooth icon .
2. From the Phone menu, tap the Settings icon in the lower right corner.
Enabling/Disabling Bluetooth
1. Access the Bluetooth Settings screen.
1. Check Enable Bluetooth to turn Bluetooth on; uncheck to turn Bluetooth off.
Enabling/Disabling Auto Connect
1. Access the Bluetooth Settings screen.
2. Check Auto Connect to set the Magellan Maestro receiver to auto connect to your paired Bluetooth phone
when it is in range; unchecked turns off auto connect.
Enabling/Disabling Audible Maneuver Warning
1. Access the Bluetooth Settings screen.
2. Check Audible Maneuver Warning to turn it on; uncheck to turn it off. (When Audible Maneuver Warning is
enabled you will hear a beep when a maneuver is needed and you are in the middle of a phone
conversation.)