Filter
Top Products
Answer:
From the speed screen, press menu. Use up/down arrow keys
to highlight odom reset and press enter mark .A pop-up
confirmation window appears Use up/down arrow keys to
highlight yes or no and press enter mark.
27 Question:
How do I reset the trip odometer in my Map 410 GPS?
Answer:
From the speed screen press menu. Use up/down arrow keys
to highlight trip reset and press enter mark. Use up/down
arrow keys to highlight yes or no enter mark.
28 Question:
How do I set the speed average in my Map 410 GPS?
Answer:
From the speed screen press menu. Use up/down arrow keys
to highlight speed avg press mark. A pop-up window appears.
Use up/down arrow keys to highlight trip, 5 seconds, 30
seconds, 1 minute, 5 minutes or 1 hour. Enter mark.
29 Question:
What information can I view on the time screen of my Map 410
GPS?
Answer:
The time screen displays the current time, estimated time
enrooted (ETE), time of arrival, and elapsed time in regards to
the route in which you are navigating.
30 Question:
How do I select the time format in my Map 410 GPS?
Answer:
From any screen press menu. Use up/down arrow keys to
highlight setup. Enter mark. Use up/down arrow keys to
highlight time format. Enter mark. Use up/down arrow keys to
highlight your choice. Enter mark.
31 Question:
What are user waypoints?
Answer:
User waypoints are locations that you save in your receiver’s
memory, including their coordinates and an icon you
associate with them. You can edit these waypoints and they
can be deleted when you no longer need them.
32 Question:
What are non-user waypoints?
Answer:
Non-user waypoints are uploaded into your receiver. They
display destinations of interest, including their coordinates
and their name. Non-user waypoints cannot be edited and are
permanently stored in your receiver’s memory.
They cannot be deleted unless written over by waypoints
downloaded from the MapSend™ CD.
33 Question:
How do I save a position fix with a user-created name?
Answer:
Enter mark. (Press and hold). Enter mark. Use arrow keys to
enter the alphanumeric characters of the name you choose.
Enter mark. Use arrow keys to highlight the waypoint icon of
your choice Enter mark. Use up/down arrows to highlight save
wpt. Enter mark.
34 Question:
How do I select a waypoint to edit (user only) in my Map 410
GPS?
Answer:
From any NAV screen press menu. Use up/down arrow keys to
highlight waypoints. Enter mark. Use up/down arrow keys to