Filter
Top Products
13 Question:
How do I customize the NAV screens in my Map 410 GPS?
Answer:
From the NAV screen press men. Use up/down arrow keys to
highlight customize and press the enter Mark key. Use
up/down arrow keys to highlight the field you wish to change
and press enter. A pop-up menu appears> Use up/down arrow
keys to highlight your choice. Enter mark> You are returned to
the NAV1 screen in the customize mode> You can continue
customizing using the same steps or press quit to exit this
mode.
14 Question:
How do I customize the compass screen in my Map 410 GPS?
Answer:
From the compass screen. Press menu. Use up/down arrow
keys to highlight customize and press the enter mark key. Use
up/down arrow keys to highlight the field you wish to change.
Enter mark. A pop-up menu appears. Use up/down arrow keys
to highlight your choice and press the enter mark key. Then
You are returned to the compass screen in the customize
mod> You can continue customizing using the same steps or
press quit to exit this mode.
15 Question:
How do I enter the map setup screen in my Map 410 GPS?
Answer:
From the map screen press menu. Use up/down arrow keys to
highlight map setup. Press the enter mark key to exit map
setup. Press the quit key.
16 Question:
What are all the options available in map screen orientation?
Answer:
The map screen has three types of orientation to choose from:
North up, course up and track up. North up has north located
at the top of the screen; Course up has the destination of the
current leg at the top of the screen; track up has the direction
you are moving at the top of the screen.
17 Question:
How do I change the map screen orientation in my Map 410
GPS?
Answer:
From the map screen press menu. Use up/down arrow keys to
highlight map setup and press enter on the enter mark key.
Use up/down arrow keys to highlight the orientation setting.
Enter mark. Use up/down arrow keys to highlight your choice
and press enter mark.
18 Question:
How do I turn on/off the latitude/longitude grid in my Map 410
GPS?
Answer:
From the map screen press menu. Use up/down arrow keys to
highlight map setup. Enter mark. Use up/down arrow keys to
highlight latitude/longitude grid. Enter mark. Use up/down
arrow keys to highlight on or off. Enter mark.
19 Question:
How do I enable/disable uploaded map data in my Map 410
GPS?
Answer:
From the map screen press menu. Use up/down arrow keys to
highlight map setup press the enter mark key. Use up/down
arrow keys to highlight the uploaded data. Press the enter
mark key. Use up/down arrow keys to highlight on or off. Enter