Filter
Top Products
18
No damage will occur if the power wires are reversed. However, the
unit will not work until the wires are attached correctly.
Mounting The Sonar Unit: In-Dash or Bracket
You can install the sonar unit on the top of a dash with the supplied
bracket. It can also be installed in the dash with an optional dash-
mounting kit. The FM-5 mount kit will work for both the X86 DS and
X86 TX.
In-Dash Installation
The following figure shows dimensions for in-dash mounting. The in-
dash adapter kit includes a template for cutting the mounting hole and
complete installation directions on instruction sheet 988-0147-43.
NOTE:
Your unit needs only one cable, but some of the other products cov-
ered by the FM-5 instruction sheet use more. When installing your
unit, use the instructions for the transducer cable and ignore refer-
ences to any others.