Filter
Top Products
63
Reset Water Distance
The sonar chart's Digital Data display option includes a window that
shows distance traveled, called Water Distance ("W Distance"). This
information is calculated from an optional water speed sensor. The Wa-
ter Distance window can be reset to zero using the Reset Water Dis-
tance command.
Press
MENU|MENU|↓ to RESET WATER DISTANCE|ENT. The menus are
cleared and the water distance is reset to 0.00.
Screen Contrast and Brightness
To access the Screen menu, press MENU|MENU|ENT.
Adjusting the display's contrast
The
CONTRAST slider bar is already selected. Press → or ← to move the
bar. The left end of the scale is minimum contrast; the right end is
maximum contrast.
Screen Command, left, and Screen Menu with Contrast bar selected, right.
To adjust the display's brightness:
Press ↓ to
BRIGHTNESS. Press → or ← to move the bar. The left end of the
scale is minimum contrast; the right end is maximum contrast.
To adjust the screen's display mode:
Press ↓ to
DISPLAY MODE|ENT|press ↑ or ↓ to select mode|EXIT.