Filter
Top Products
56
Left, figures 1A and 2A show Sonar Page in normal chart mode. Right,
figures 1B and 2B show the same underwater scene with Fish I.D.
turned on. Note how arches are replaced with symbols.
To turn the Fish I.D. feature on
1. From the Sonar Page, press
MENU|↓ to SONAR FEATURES|ENT.
2. Press → to
FISH SYMBOLS|ENT|EXIT|EXIT.
To turn off Fish I.D., repeat the instructions in step 2.
FishTrack
The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. This lets you accurately gauge the depth of tar-
gets. This feature is available only when the Fish I.D. feature is on. The
default setting for FishTrack is off.
To turn on FishTrack
1. From the Sonar Page, press
MENU|↓ to SONAR FEATURES|ENT.
2. Press →|then press ↓ to
FISH DEPTHS|ENT|EXIT|EXIT.
Fish arches
above structure
No fish shown
FasTrack graph
confirms fish
above stru
c
ture
Fig. 1A Fig. 1B
Fig. 2A
Fig. 2B
Many fish
arches visible
Fewer fish
symbols visible