Lowrance electronic 7600C HD GPS Receiver User Manual


 
21
Front view (left) and side view (right) showing dimensions of the
GlobalMap 7500 and GlobalMap 7600 mounted on gimbal brackets.
To pass all connectors through the 1" hole, first pass the antenna con-
nector up through the hole from under the dash. Next, pass the power
cable's bare-wire end down though the hole from the top.
If you wish, you can fill in the hole around the cables with a good ma-
rine caulking compound. No matter what type of installation you pre-
fer, be sure to leave enough slack in the cables to allow tilting or swiv-
eling the unit.
Attach the unit to the gimbal bracket using the supplied gimbal knobs
and washers. Attach the cables and the unit is ready to use.
In-Dash Installation
You can mount the GlobalMap 6500 and GlobalMap 6600 in the dash
with an optional FM-3 In-Dash Adapter Kit. The kit includes mounting
hardware and a template for cutting the hole.
Millimeter
[Inch]