Filter
Top Products
12 AA alkaline batteries
Hobby knife
Traxxas Top Fuel
™
see page21
Fuel dispensing bottle
Part #5001
Small flat-blade screwdriver
for tuning (1/8 inch blade)
After-run oil to protect
the engine from corrosion
10% quart - #5010
20% quart - #5020
33% quart - #5030
10% gallon - #5060
20% gallon - #5070
33% gallon - #5080
NiCad or NiMH
7.2V battery pack
Philips screwdriver
Required Tools and Equipment (sold separately)
NiCad or NiMH battery charger
Traxxas part #3030X shown
Accessory Equipment (sold separately)
Nitro 4-Tec 3.3
•
5
Your Nitro 4-Tec 3.3 comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate and maintain your model.
Tools, Supplies, and Required Equipment
Supplied Tools and Equipment
(see page 22)
For more information on
radio system batteries, see
Use the Right Batteries on
page 11.
A peak-detecting charger,
such as the TRX Power
Charger (part #3030X), is
recommended for best
performance and longest
battery life. For more
information, see
Use the
Right Charger
on page 25.
Glow plug and
wheel nut wrench
1.5mm “L” hex wrench
U-joint wrenchTurnbuckle wrenches
4-way wrench
2.0mm “L” hex wrench
Recommended Equipment
These items are not
required for the operation
of your model, but are a
good idea to include in any
R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Side cutters or needle
nose pliers
• Metric hex driver set
Foam air filter oil and
extra oiled air filter element
RX battery power pack
Traxxas part #3037
DC car adapter for TRX Power Charger
Traxxas part #3032
TRX Power Charger
Traxxas part #3030X
RX Wiring Harness
Traxxas part #3034
2.5mm “L” hex wrench Antenna nut wrench