Filter
Top Products
Clock setting
2
3
Vehicle access
Remote control Tailgate
Central locking
Single point entry
This is a security feature that unlocks only the
driver’s door. It can be disabled on individual
remote controls by simultaneously pressing and
holding the lock and unlock buttons for three
seconds. The vehicle will lock and then unlock in
the currently selected mode to confirm the change.
Dependent upon specification and vehicle
configuration, the operation of the remote
control may differ from the following.
Automatic relock
If the vehicle is unlocked with the remote
control, it will automatically relock and arm the
alarm if a door or the tailgate is not opened
within one minute.
Key blade
Press button (arrowed in illustration) to release
the key blade.
Master lock and unlock switches
1. Press to unlock all doors and tailgate.
2. Press to lock all doors and tailgate.
Speed-related locking
If enabled, the doors and tailgate will automatically
lock when the vehicle's speed exceeds 5 mph.
This feature can be disabled or enabled in the
Settings option accessed via the trip computer.
1
• Press once to lock all doors and activate
the alarm.
• Press once to deactivate the alarm and
unlock the driver’s door (Single point
entry).
• A second press will unlock all other
doors.
Customer configurable button. Can be
programmed to remotely operate one of the
following functions:
• Headlamp on (default).
• Panic alarm.
• Air suspension.
Refer to Programming the remote control
in the Owner’s Handbook.
Opening the upper tailgate
With all the doors unlocked, press the release
switch 1 on the underside of the exterior handle
and pull to open.
Opening the lower tailgate
With the upper tailgate open, press the touch
pad 2 on the lower tailgate waist moulding.
2
The clock displayed on the audio unit and in the
message centre is set via the audio unit menu.
To adjust the time:
1. Press the MENU OK button.
2. Rotate the rotary control clockwise until
Clock is displayed and highlighted.
3. Press the control to select and enter the
clock setting mode.
4. Dependent upon specification of audio unit,
the time display may be changed between
12 and 24 hour modes.
5. Select Set to display the hour setting. Rotate
the control to adjust and press to confirm.
6. The display then shows the minute setting.
Rotate the control to adjust and press to
confirm.
Clock
News
123456
Time
Set
AM
09
123456
09