Filter
Top Products
TECHNICAL SPECIFICATIONS – ENGINE »
ENGINE 950 LC8 2007
Ignition system breakerless transistorized electronic ignition system with digital ignition advance
Ignition timing 5° BTDC at 1200 rpm
Generator 12V 450W at 6000 rpm
Spark plug NGK CR 8 EK
Electrode distance 0.7 mm
Cooling system liquid cooled, permanent circulation of cooling liquid through water pump
Cooling liquid 2.1 liters (0.55 USgal), 50% antifreeze, 50% distilled water, at least –25° C
Starting aid 0.9 kW electric starter
10W/50
5W/40
JASO T903 MA
TEMPERATURE
0°C
32°F
Engine oil
Only use fully synthetic engine oils that meet
the JASO MA quality requirements (see infor-
mation on the can).
KTM recommends Motorex Power Synt 4T in
the 10W/50 viscosity (for temperatures over
0°C, 32°F) or 5W/40 (for temperatures under
0°C, 32°F).
#
BASIC CARBURETOR SETTING
Type of carburetor CVRD 43
Main jet 155 (front) / 160 (rear)
Main air jet 40
Idling jet 42
Idle air jet 50
Idle air cutoff jet 80
Jet needle NDFB
Needle position 2nd from top
Mixture control screw open 2 1/4 turns
Starting jet 68
84
PON / CLC RON / ROZ MON
87 91 83
91 Premium 95 87
PON = Pump Octane Number
CLC = Cost of Living Council
RON = Research Octane Number
ROZ = Research Oktan Zahl
MON = Motor Octane Number
*