Filter
Top Products
Bleeding the cooling system (950 Supermoto)
For better access to the radiator cap and bleeder screw, lift the tank about 10 cm in the
front.
Take off the tank trim on the left [3] and right [4].
62
3
4
Checking the cooling liquid level in the radiator (950 Supermoto R)
Hold the radiator cap [1] with a cloth, carefully turn in a counterclockwise direction and
remove. The radiator should be completely filled with cooling liquid; no air should be in the
radiator.
If any cooling liquid is missing, the cooling system is probably leaking. Have the cooling
system checked at an authorized KTM workshop.
If possible, check the cooling liquid level when the engine is cold. If you need to remove
the radiator cap when the engine is hot, hold the cap with a cloth and open slowly, allow-
ing any excess pressure to escape (danger of scalding).
– If more than 1 liter of cooling liquid needs to be added, you will need to bleed the cool-
ing system.
– Only continue to drive if there is enough cooling liquid in the system. Contact an author-
ized KTM workshop to have the error eliminated. You will damage the engine if you con-
tinue to drive when the cooling liquid temperature warning lamp is on.
1
MAINTENANCE WORK ON CHASSIS AND ENGINE »