Filter
Top Products
Ignition lock
The ignition lock [1] has 3 switching positions.
Ignition off, (engine can't be started)
Ignition on, light on, (engine can be started)
Ignition off, handlebar blocked
To switch the ignition to position turn the ignition key to position and firmly press it
into the lock. Turn the handlebar to the left, then turn the ignition key to the left.
The ignition key can be withdrawn in position and .
OPERATION INSTRUMENTS »
13
3
Combination switch
The light switch has 2 switch positions.
[A] = Low beam light
[B] = High beam light
The red short circuit button [2] serves to switch off the engine. Leave the switch pressed,
until the engine stops. With the button [3] the horn will sound.
Flasher switch
The flasher switch [4] is mounted on the left side of the handlebar.
Flasher left
Flasher right
A
B
2
1
4