KTM 450 XCR-W USA Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 74

Fitting the main silencer
400337-11
Check parts for damage and wear. Replace damaged or worn parts.
Mount the main silencer. Mount and tighten screwsb
.
Specification
Remaining screws, chassis M6 10bNm (7.4blbfbft)
Reconnect springb
.

Dismounting the air filter box lid
400338-10
Pull off the air filter box lid in areabto the side and remove to the front.

Installing the air filter box lid
400338-11
Check parts for damage and wear. Replace damaged or worn parts.
Insert the air filter box lid into the rear areab
and clip it into the front areab.

Removing the air filterb
x
Note
Engine failureUnfiltered intake air has a negative effect on the service life of the engine.
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazardProblem materials cause environmental damage.
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
Dismount the air filter box lid. ( P. 74)
500107-10
Hang the air filter holderb out to the bottom and swing it to the side. Remove the
air filter with the air filter support.
Remove the air filter from the air filter support.