Filter
Top Products
ENGLISH
7
Shift lever
The shift lever is mounted on the left side of the engine. The position of the
gears is shown in the illustration. Neutral, or the idle speed, is located between
first and second gear.
OPERATION INSTRUMENTS »
Kickstarter
The kickstarter is mounted on the left side of the engine. Its upper part can
be swivelled.
Foot brake pedal
The foot brake pedal is disposed in front of the right foot rest. Its basic posi-
tion can be adjusted to your seat position (see maintenance work).
1
N
2,3,4,5, (6)
2
3
1
Compression damping of fork
Hydraulic compression damping determines the reaction when the fork is com-
pressed. The degree of compression can be adjusted with adjusting
screws at the bottom of the fork legs.
Turn the screw [1] clockwise to increase damping, turn it counterclockwise
to reduce damping during compression.
STANDARD ADJUSTMENT:
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
Typ WP Suspension 14187D01 . . . . .14 clicks
Typ WP Suspension 14187D03 . . . . .14 clicks
Rebound damping of fork
Hydraulic rebound damping determines the reaction when the fork is
rebound. Remove the protecting cap [2].
By turning the adjusting screw [3], the degree of damping of the rebound can
be adjusted. Turn the knob clockwise to increase damping, turn it counter-
clockwise to reduce damping during rebounding.
STANDARD ADJUSTMENT:
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
Typ WP Suspension 14187D01 . . . . .21 clicks
Typ WP Suspension 14187D03 . . . . .21 clicks