Filter
Top Products
ENGLISH
38
TECHNICAL SPECIFICATIONS – CHASSIS 125/144/250 SX 2008»
TIGHTENING TORQUES – CHASSIS
Collar screw, front wheel spindle M24x1,5 40 Nm
Colear screws brake caliper, front M8 (10.9) Loctite 243 + 25 Nm
Collar screws brake disks M6 (10.9) 14 Nm
Clamping screws, upper fork bridge M8 (10.9) 17 Nm
Clamping screws, lower fork bridge M8 (10.9) 12 Nm
Clamping screws, upper steering stem M8x25 (10.9) Loctite 243 + 17 Nm
Collar srcew top steering stem M20x1,5 10 Nm
Collar screw bottom steering stem M20x1,5 Loctite 243 + 60 Nm
Clamping screws, fork stubs M8 15 Nm
Collar nut, rear wheel spindle M20x1,5 80 Nm
Hexagon nut, swing arm bolt M16x1,5 100 Nm
Collar screw, handlebar clamp M8 (10.9) 20 Nm
Allan head screw, handlebar support M10 (10.9) Loctite 243 + 40 Nm
Shock absorber, top collar screw M12 (10.9) Loctite 243 + 70 Nm
Shock absorber, bottom collar screw M12 (10.9) Loctite 243 + 70 Nm
Flat-head screws for subframe M8 (10.9) Loctite 243 + 40 Nm
Collared nuts for rear sprocket screws M8 (10.9) Loctite 243 + 35 Nm
Ball joint for push rod M6 (10.9) 10 Nm
Engine mounting bolt M10 (10.9) 60 Nm
Engine brace M8 (10.9) 33 Nm
Screw adjusting ring spring preload shock absorber
M6 8 Nm
Spoke nipple M4.5 / M5 5 Nm
Other screws on chassis M6 10 Nm
M8 25 Nm
M10 45 Nm
Other collar nuts on chassis M6 15 Nm
M8 30 Nm
M10 50 Nm