KTM 1190 RC8 AUS/UK Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 141
700313-01
Remove bushing and bushing. Clean and grease the roll surfaces of the bushing
and the shaft seal rings.
Long-life grease ( S. 224)
Fit the bushings.
Clean the thread of the wheel spindle and nut.
Clean the contact areas of the brake caliper support and swingarm.
700314-01
Push the brake caliper support completely to the rear.
Position the rear wheel, and position the brake caliper support between the rim and the
brake disc.
Position the brake caliper on the brake disc.
Position the rear wheel on the bearing surfaces in the swingarm.