KTM 1190 RC8 AUS/UK Motorcycle User Manual


 
STORAGE 206
Cover the motorcycle with a porous sheet or blanket.
Info
Do not use non-porous materials since they prevent humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water vapor produced during
combustion condenses and causes valves and exhaust system to rust.
15.2Putting into operation after storage
Take the front of the motorcycle off the work stand. ( S. 95)
Take the rear of the motorcycle off the work stand. ( S. 96)
Recharge the battery.x ( S. 151)
Install the battery.x ( S. 150)
Set the clock with SETCLOCK. ( S. 62)
Fill up with fuel. ( S. 89)
Make checks before putting into operation. ( S. 81)
Make a test ride.