Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 139
700311-01
– Remove nut. Remove chain adjuster. Withdraw the wheel spindle.
700312-01
– Push the rear wheel forwards as far as possible and take the chain off the rear sprocket.
– Pull the rear whell backwards until the brake caliper support hangs free between the
brake disc and the wheel rim.
Warning
Danger of accidents Reduced braking effect caused by damaged brake discs.
– Always lay the wheel down in such a way that the brake discs are not dam-
aged.
– Take the rear wheel carefully out of the swingarm without damaging the rim and/or
brake disc.
Info
Do not operate the foot brake when the rear wheel is removed.