Kenwood KCA-BT200 GPS Receiver User Manual


 
English
|
11
Receiving a call
Answering a Phone Call
Model-D-1, 2, 3:
Press the [AUDIO] button or one of [1] – [6] buttons.
Model-D-4:
Press the [VOL] button or one of [1] – [6] buttons.
Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Press the [SRC] button.
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode (
)
Press the Control knob ([38] button).
Switches between Private talk ("PV TALK"/ "PRIVATE")
or Hands-free talk ("HF TALK"/ — ) when pressed.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.
Other functions
Clearing the Disconnection Message
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between Display Modes
You can switch between the Phone Book and the Call
List.
Model-D-1, 2, 4:
Press the [DISP]/ [AUTO]/ [TI] button. (If the [DISP]
button is not provided, press the [AUTO] or [TI]
button.)
Model-D-3:
Press the [AUTO]/ [TI] button.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Model-D-1, 4:
Press the [1] – [6] button for at least 2 seconds.
Model-D-2:
2-1. Press the [FNC] button.
2-2. Select the number to memory by turning the
Control knob.
2-3. Press the Control knob.
Model-D-3:
2-1. Press the [NEXT] button.
2-2. Press the [1] ("1") – [6] ("6") button for at least 2
seconds.
3. Exit the dialing method selection mode
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Press the [MENU] button.
Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
*
1
To enter the Menu mode, push the Control knob
towards right or left.
Display Setting overview
"PHN-SEL"*/
"Phone Selection"*
Select a cell-phone subject to hands-free connection.
Refer to page 14.
"PHN-DEL"*/
"Phone Delete"*
Cancel registration of the Bluetooth device. Refer to
page 14.
"D.MODE"* Model-D-4: Select a dialing method. Refer to page 10.
"P-STATUS"*/
"Phone Status"*
1
"BT-CON"/ "BAT"/ "SGNL": Display the status of the
Bluetooth device. Refer to page 22.
"ANS"/
"Auto Answer"
"OFF"/ "0" – "99": Answer a call automatically after
lapse of the preset time interval for automatic answer.
Refer to page 22.
"SPK"/
"SP Select"
"FRT"("Front")/ "F-R"/ "F-L": Specify the voice output
speaker. Refer to page 22.
"C-BP"/
"Call Beep"
"ON"/ "OFF": Output a beep from the speaker when a
call comes in. Refer to page 22.