Kenwood DNX4250DAB GPS Receiver User Manual


 
9494
Return to the Top page
Setting Up
AV Input Setup
You can set AV input parameters.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
4 Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5 Set each item as follows.
TV Tuner Control
Sets when connecting the TV tuner to AV
INPUT.
ON: Set to ON when connecting the 3rd party
TV tuner. AV-IN Name is set to TV. If you
connect the TV tuner made by DOS and
watch TV, you can perform some simple
operations by touching the screen of this
unit.
OFF (Default): Set to OFF when not connecting
the 3rd party TV tuner.
AV-IN1 Name/AV-IN2 Name
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is “VIDEO”.
AV Output Interface Setup
You can select an AV source to be output at
the AV OUTPUT port. Default is “VIDEO1”.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [AV-OUT].
AV-OUT Interface screen appears.
4 Touch [2] or [3] to set [AV-OUT] to
VIDEO1, DISC, iPod, USB, or OFF.
NOTE
• Only when iPod is connected to this unit with
KCA-iP202, “USB” can be selected as AV output
source. For the connection setting, refer to iPod/
iPhone connection setup (P.56).