Filter
Top Products
R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XJ
Voice control
119
Voice control
USING VOICE CONTROL
1. Voice button: Press briefly to start a voice
session. Press and hold to cancel a voice
session.
Note: Briefly press the Voice button,
during a voice session, to interrupt audible
feedback. Wait for the tone to sound before
giving the next command.
2. Voice symbol: Indicates that a command is
available. Wait for the symbol to appear (a
tone will also sound) before using the
command.
3. Command list. Appears on the right side of
the instrument panel, providing feedback
and available commands at each stage of
the voice session.
4. When displayed, say Cancel to cancel the
current voice session.
5. When displayed, say Help to get assistance
during a voice session.
Voice control is operated by following this
procedure:
1. Briefly press the Voice button to start a
voice session.
2. Wait for the command list to appear in the
instrument panel. When the system is
ready, a tone sounds and the voice
symbols appear next to the commands.
3. Say an available command.
Note: As the commands are listed before
the system is ready to listen, it is important
to wait for the voice symbol to appear
alongside the relevant command, before
using the command.
4. Wait for the list to update with any
feedback and available commands for the
next stage of the session. Wait for the tone
to sound.
5. Say the next command.
6. Repeat this procedure until the chosen task
is accomplished.
Note: If any information is longer than the
available space on the menu, ...> will appear.
Use the right and left arrow joypad controls on
the steering wheel to view the entire entry.