Filter
Top Products
R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XJ
Portable media
105
PAIRING AND CONNECTING USING
THE MEDIA PLAYER
For further information on Bluetooth®, see
122, BLUETOOTH® INFORMATION.
Note: The process of pairing and connecting
your media player with the vehicle using the
media device will vary depending on the type of
media player.
1. Switch on the ignition and ensure the touch
screen is active.
2. From the My music menu, select
Bluetooth, then select Use device.
Note: The vehicle’s Bluetooth® system is
only discoverable for 3 minutes.
Note: The vehicle’s Bluetooth® PIN must
be the same number as entered on the
media player.
3. Using the media player, search for
Bluetooth® devices. On some media
players this is referred to as new paired
device. See your media player’s operating
instructions for further information.
4. When the vehicle’s Bluetooth® system is
discovered (named Jaguar XJ), follow the
on-screen instructions. Select Yes when
prompted, to confirm the pairing.
5. When prompted, enter the Bluetooth® PIN
(Personal Identification Number) and
select OK to confirm.
Note: The vehicle’s Bluetooth® PIN must
be the same number as entered on the
media player.
6. Once your media player is paired and
connected to the system, a confirmation
message will be displayed, before the
control screen is shown.
Note: Some media players do not
automatically connect and need to be manually
connected, via the device or by using the
Change device option.
PAIRING AND CONNECTING A
BLUETOOTH® DEVICE USING THE
TOUCH SCREEN
For further information on Bluetooth®, see
122, BLUETOOTH® INFORMATION.
1. Switch on your media player’s Bluetooth®
connection, using the media player’s
menu. Make sure that your media player is
in Bluetooth® ‘discoverable’ mode,
sometimes referred to as ‘find me’ mode
(see your media player’s operating
instructions for more information).
2. Switch on the ignition and ensure the touch
screen is active.
3. From the My music menu, select
Bluetooth, then select Search new.
4. Identify your media player from the
displayed list and select the corresponding
Pair and connect option.
5. When prompted, enter the 4-digit code into
your media player (see your media player’s
operating instructions for more
information).
6. Once your media player is paired and
connected to the system, a confirmation
message will be displayed, before the
control screen is shown.
Note: Due to the duration of a Bluetooth®
search, it is advised that the timeout to home
screen feature is switched off before
attempting to search for Bluetooth® devices.
This setting can be changed within Vehicle,
Syst. settings, Display set.