Filter
Top Products
670042 (en) Page 5 of 8
)
ASSEMBLY TORQUE REQUIREMENTS
(
NOTE: DO NOT OVERTIGHTEN FASTENERS.
(14) bolt, 95 - 105 in. lbs (10.7 - 11.9 Nm).
(26) bolt, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then re-torque after initial run-in.
(29) nut, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then re-torque after initial run-in.
LUBRICATION / SEALANTS
c
Apply Lubriplate FML-2 grease (94276) to all “O” rings, “U” cups and mating parts.
d
Apply gasolene-resistant pipe sealant to threads.
e
Apply anti-seize compound to threads and bolt and nut flange heads which contact pump
case when using stainless steel fasteners.
f
Apply Loctite® 242® to threads.
NOTE: Lubriplate FML-2 is a white food grade petroleum grease.
PARTS LIST / 670042 FLUID SECTION
FOR THE AIR MO-
TOR SECTION, SEE
PAGES 6 & 7.
Figure 3
COLOR CODE
Diaphragm Ball
Material Color Color
Viton Yellow (•) Yellow (•)
(•) Dot
Torque Sequence
3
2
7
5
1
8
6
4
19
c
19
c
21
21
22
22
15
61
26
(
e
26
(
e
60
14
(
f
751
ce
27
29
(
e
6
12
12
81
d