Filter
Top Products
10-17 108602 10/08
Do not remove or modify
stabilizer wheels or rear engine
guard or injury can result.
Keep engine and pump
compart-ment(s) clean
(especially in exhaust area) to
prevent fire and provide
maximum engine and hydraulic
cooling.
Hydraulic fluid escaping under
pressure can penetrate skin.
Hydraulic fluid may also cause
infection in a minor cut or opening
in the skin; if exposed to hydraulic
fluid, see a doctor at once.
Before applying pressure to
hydraulic system, make sure all
connections are tight and all
hoses and lines are in good
condition.
Relieve all pressure in the system
before disconnecting or working
on hydraulic lines.
To find a leak under pressure,
use a piece of cardboard or wood
– never use your hands.
To relieve all pressure in system,
turn engine off and lower
attachment.
Keep shields or covers in place
while machine is in operation.
Keep hands away from rotating
pulleys and belts.
If you lose steering control
while operating the machine,
place the steering control levers
in the park brake position
immediately. Inspect the
machine and involve your Hustler
dealer to resolve the problem
before continuing to operate.
If pump belt fails, steering
control will be lost. Refer to
owner’s manual for inspection
and replacement intervals and
refer to above paragraph for
emergency procedures.
Hot surface!
Part Number
771436
Part Number
788968
727008
Part Number
Part Number
727453
Part Number
600899
Part Number
779280