Husqvarna HUV4213 Automobile User Manual


 
Controls and Indicators
Page 12 2005 HUV4213 Gasoline Vehicle Owner’s Manual
BRAKE PEDAL
The brake pedal is the large pedal on the left with the word STOP molded into it (Figure 5). To slow or stop
the vehicle, press the brake pedal (Figure 6).
PARK BRAKE
The park brake handle is located between the driver and passenger seats. To engage the park brake, first
apply pressure to the brake pedal, and then pull up on the park brake handle until handle latches into place.
To disengage, pull up on the handle and press the button on the end of the handle. Push handle down. See
following WARNING.
ý WARNING
The park brake has multiple locking positions and should be firmly locked to prevent the
vehicle from rolling.
CHOKE
The choke is located on the seat support panel below and to the left of the driver’s left knee. If the vehicle is
hard to start in cool or cold temperatures, activate choke: Pull the choke handle out to activate. Release the
handle when the engine begins to run smoothly (Figure 7).
Figure 5 Accelerator and Brake Pedal Figure 6 Brake Pedal
Figure 7 Choke Figure 8 Differential Lock
WARNING