Filter
Top Products
46
Side Beam View
(with optional-purchase QuadraBeam PLUS™ transducer)
Side Beam View is only available if you have connected an optional-purchase
QuadraBeam PLUS™ transducer accessory and set Transducer Select to
QuadraBeam (see Sonar Menu Tab: Transducer Select).
NOTE:The QuadraBeam PLUS™ transducer requires a separate purchase.
Side Beam View displays sonar data from the left and right 455 kHz beams and
the 200 kHz down-looking beam in one view.
• The sonar information from the side-looking beams reveals bottom
contour, structure, and fish similar to the down-looking beam, but the
area covered is to the left and right, which gives you a wider view of the
bottom.
• The Side Beam View can be arranged in any of the following layouts:
Default, Classic, and Slanted.
To adjust the Quad Layout Setting for the Side Beam View:
1. From the Side Beam View, press the MENU key once to access the
Sonar X-Press™ Menu.
2. Press the DOWN Cursor key to highlight Quad Layout.
3. Press the LEFT or RIGHT Cursor keys to change the Quad Layout setting
for the Side Beam View. (Default, Classic, Slanted, Default = Default)
The distance covered by the right and left side-looking beams is controlled by the
Depth Range setting for the down-looking beam, up to a maximum of 160 feet (see
Sonar Menu Tab: Depth Range).
Views