Filter
Top Products
Cursor to Waypoint
(Chart or Combo view only)
Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint,
so that you can locate it or edit it.
NOTE: This X-Press™ menu item appears only if you have saved waypoints.
To move cursor to a saved waypoint:
1. Highlight Cursor to Waypoint on the Navigation X-Press™ menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.
3. Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint
you wish to move the cursor to, then use the RIGHT 4-WAY Cusor Control
key to select the destination waypoint.
Save Current Track
Save Current Track allows you to save the current
track beingdisplayed.Afterthe currenttrackissaved,a new currenttrackisstarted.
To Save Current Track:
1. Highlight Save Current Track on the Navigation X-Press™ menu.
2. Use theRIGHT 4-WAY CursorControlkeyto initiate saving the currenttrack.
3. The Confirm dialog box will appear. To save the current track, press the
RIGHT Cursor key once more. To cancel saving the current track, press the
LEFT Cursor key.
27