Filter
Top Products
74
Start-Up Options Menu
Simulator
Use Simulator to learn how to use your Fishfinder before taking your boat on
the water. The Simulator is a very powerful tool that provides a randomly-
updated display which simulates on the water operation.
We recommend going through this manual
while using the Simulator, since all of the
menus function and affect the display in
the same way as they would in Normal
operation. Any menu changes you make
will be saved for later use.
NOTE: It is important to select Simulator manually
from the Start-Up Options Menu as opposed to
lettingtheFishfinderenterSimulatorautomatically
(as it will if a transducer is not connected and you
do nothing during power up).
A message will appear often on the
display to indicate Simulator mode.
To exit Simulator, power off your Fishfinder.
System Status
Use System Status to view system connections and to conduct a unit self-test.
After you select System Status from the Start-Up Options Menu, press the
VIEW key to display the following options:
• Self Test
• Accessory Test
• GPS Diagnostic View
To exit System Status, power off your Fishfinder.
Simulator