Filter
Top Products
25
© 2004 directed electronics, inc.
triggered response description
A Triggered Response can be activated by any of the triggers listed
below and consists of an alarm page along with the response
described for each trigger. The default Triggered Response dura-
tion is 30 seconds but can be programmed from 1-180 seconds
by your installer with the Directed Bitwriter
®
.
➤
SSeennssoorr TTrriiggggeerr
- Heavy impacts to the vehicle will instantly
sound the siren and flash the lights for the programmed
duration and report Zone 2.
➤
DDoooorr TTrriiggggeerr
- If a door is opened the siren will chirp for three
seconds, then the siren will sound and the lights will flash for
the programmed duration and report Zone 3. The three
seconds allow the user time to disarm the system with a
minimum of noise should a door be opened inadvertently
while the system is armed.
➤
HHoooodd TTrriiggggeerr
- Opening the hood will sound the siren, flash
the lights for the programmed duration, and report Zone 1.
➤
TTrruunnkk TTrriiggggeerr
- Opening the trunk (if connected) will
instantly sound the siren and flash the lights for the
programmed duration and report Zone 4.
➤
IIggnniittiioonn TTrriiggggeerr
- If the ignition is turned on the siren will
chirp for three seconds, then the siren will sound and the lights
will flash for the programmed duration and report Zone 5.
When a Triggered Response is activated the transceiver will:
➤ Repeat four quick beeps (or vibrate) for 15 seconds.
➤ The full trigger alert icon (28) will turn on for 15 seconds.
➜