Honeywell V4055F Automobile Parts User Manual


 
PRODUCT DATA
65-0029-02
V4055F,G Fluid Power Actuator
with Manual Control
APPLICATION
The V4055F and G fluid power gas valve actuators are for use
with the V5055 valve for gas safety shutoff applications to
control the gas supply of commercial and industrial burners.
FEATURES
Fast opening time of 13 seconds at 120 V, 60 Hz.
Maximum closing time, is 1 second, which meets approval
body requirements.
Unit available with FM approved proof of closure switch.
Red “OPEN” indicator attached to the actuator piston will
show if the valve is even slightly open; yellow “SHUT”
indicator on the valve stem will show only when the gas
valve is fully closed.
Ambient temperature rating of -40°F to +150°F (-40°C to
+66°C).
Valve and actuator may be mounted in any position.
Optional, field-adjustable, spdt auxiliary switch, rated at
112 hp (0.37 kW), may be added in the field.
Standard enclosure meets NEMA 1 (IP30) general
purpose requirements.
Red light indicates when valve is ready to open.
Rocker switch allows manual operation of valve.
Valve closes on power loss.
NOTICE: Per Industry standards, the actuator is required a
conduit seal or a cable type that is sealed be installed in a
device that can result in a flammable liquid flow through a
conduit or cable to an electrical ignition source in the event of
a seal leakage or diaphragm failure.
Contents
Application ........................................................................ 1
Specifications ................................................................... 2
Operation .......................................................................... 2
Ordering Information ........................................................ 2
Installation ........................................................................ 3
Wiring ............................................................................... 5
Checkout and Service ...................................................... 5