Havis-Shields KK-K9-C20-K-PT Automobile Parts User Manual


  Open as PDF
of 7
 
KK-K9-C20-K-PT_INST_10-07
With door panel installed, hold up window guard assembly with top
bracket between rubber and metal frame. Guard hinge will sit on
top of door panel. Mark location of top bracket and hinge.
Remove top bracket
from window guard
Hold top bracket in its location, mark the four mount holes and
drill with 1/8” drill bit. Carefully hold rubber gasket away from
drill. Drill 1/8” holes for hinge mounting. Attach Top bracket
and hinge with #10 x ½” sheet metal screws.
Hinge up window guard and
attach to top bracket with 10/32 x
½ machine screws
Final Door
panel and
window
guard
assembly
Center door panel on door.
Push down and drill mount
holes with 1/8” bit. Attach with
#10 x ¾” Sheet metal screws
 previous