Filter
Top Products
KK-K9-C20-K-PT_INST_10-07
Attach to existing seat
bolt studs with O.E.M
seat bolt nuts
Slide in Main K9 Housing and rest on mounting feet.
Assemble Mounting feet to floor plates in
locations shown above
Set height at 7.5”
Passenger-side
Driver-side
1. Mount 7” bracket at Top and 5” bracket at bottom
2. Seat belt mount bracket lower tab may need to be slightly bent out of the way
3. Reattach seat belt bolt and trim and Cut Plastic Trim at “L” bracket if necessary.
4.
Mount Partition to “L” brackets.