Filter
Top Products
KK-K9-C20-K-PT_INST_10-07
Line up driver and passenger-side floor mounting brackets and loosely
attach to K9 main housing, using ¼” x ¾” stainless carriage bolts and
serrated nuts.
**Do not tighten hardware until the side tunnel is set in place**
Attach driver side tunnel with ½” long and ¾ “ long
carriage bolts. Position K9 unit so tunnel lines up with
rocker panel plastic trim. Move driver seat to rear most
position.
Attach upper prisoner
filler panel using ex
isting
¼ x ¾” stainless carriage
bolts and serrated nuts