Filter
Top Products
Page 2SKU 98135 For technical questions, please call 1-800-444-3353.
SAVE THIS MANUAL
Keep this manual for the safety warn-
ings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WARNING
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
CAUTION, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
NOTICE is used to
address practices
not related to personal injury.
CAUTION, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
WARNING! Read all instructions
Failure to follow all instructions listed below
may result in re, explosion and/or serious
injury.
SAVE THESE INSTRUCTIONS
Installation safety
When connecting this Fuel Trans-1.
fer Pump to a 12 Volt DC battery or
power source, connect the nega-
tive wire, the positive wire and the
ground wire. All three need to be
connected securely before using
this Pump.
Install the Fuel Pump according to 2.
the instructions in this manual. A
risk of explosion may be created
if some instructions are not fol-
lowed.
This Fuel Transfer Pump has a built-3.
in Check Valve Assembly (27) with
mal expansion from causing unsafe
system pressure. DO NOT install
additional check valves or foot valves
during installation without proper
re lief valves built into them. Product
damage may result.
Keep work area clean and well lit. 4.
Cluttered or dark areas invite acci-
dents.