Filter
Top Products
SKU 95621 Page 2
Specifications
Overall Dimensions 17” L x 19” W x 42-3/4” H (fully
extended)
Weight Capacity
132 lbs.
Adjustable Height 26-3/4” to 42-3/4” H with positive
stops
Material Steel Square and Round Tubing
Thermoplastic Rubber Shoes
Foldable Design
Ball Bearing Roller
11-1/4” L
Net Weight
9.46 lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When assembling and using stand, basic safety precautions
should always be followed to reduce the risk of personal injury and damage
to equipment. Read all instructions before setup and use!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use in damp or wet locations. Don’t
expose to rain. Keep work area well lighted. Do not use electrically powered
tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords. Never allow children
to play with or climb on the Roller Stand
4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
5. Do not force tool. It will do the job better and more safely at the rate for
which it was intended. Do not use modify the Roller Stand to perform a task
for which it was not designed.