Filter
Top Products
SKU 95058 For technical questions, please call 1-800-444-3353 Page 2
Specifications
Construction
High Impact Plastic Body with
Tempered Glass Lens, Aluminum
Starter Box
Power Requirement
12 VDC, 3A (both lights),
5A fuse (included)
Bulb Color
Blue
Bulb Type
H3 6000K
Total Weight
1.6 lb.
Light Dimensions
3-7/8” D x 3-1/4” W x 3” H
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual.
Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe
and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using equipment, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before installing or using!
Keep your work area clean and well lit. Cluttered benches and dark areas invite ac-
cidents.
Do not operate automotive accessories in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Batteries and automotive accessories
may create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away from the installation area. Distractions
can cause you to lose control. Protect others in the work area from debris such as corro-
sion materials and sparks. Provide barriers or shields as needed.
Do not abuse the Power Cord. Never use the Power Cord to carry the lights. Keep
the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged
Power Cords immediately. Damaged Power Cords increase the risk of fire.
Stay alert. Watch what you are doing, and use common sense when operating a
automotive accessory. Do not use a automotive accessory while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while operating a
automotive accessory may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your
hair, clothing, and gloves away from moving engine parts. Loose clothes, jewelry, or
long hair can be caught in moving engine parts.
Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes,
hard hat, or hearing protection must be used for appropriate conditions. ANSI-approved
goggles and heavy work gloves should be worn during installation.
1.
2.
3.
4.
5.
6.
7.