Harbor Freight Tools 95058 Automobile Accessories User Manual


 
SKU 95058 For technical questions, please call 1-800-444-3353 Page 3
Use only with vehicles with 12 volt DC electrical systems.
Use bolts and included fasteners to properly secure and support the fog lights to a
stable platform. This automotive accessory is designed to be installed to a firm structure
near the vehicle front grill or bumper.
Turn vehicle ignition off before making cable connections. Vehicle’s engine must be
cooled down before making cable connections.
Disconnect the battery cable before installing lights or changing bulbs. Such preven-
tive safety measures reduce the risk of accident.
Keep automotive accessory maintained and clean. Do not use a damaged automotive
accessory. Tag damaged automotive accessories “Do not use” until repaired.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one item may become hazardous when used on
another item.
Avoid contact with Battery Acid. If splashed, immediately wash affected area with clean
water and baking soda for at least 15 minutes. If irritation persists get medical help im-
mediately.
Connect Fog Lights cables to proper polarities. Connect black cable to the negative
battery terminal, and the red cable to the positive battery terminal (for a negative grounded
system). Failure to do so could result in sparks, possible fire and severe personal injury.
Keep cables clear of fan blades, belts, pulleys, and other moving parts of the engine
that may cause injury, or damage to the Fog Lights.
Do not allow the Black and Red battery cables or terminals to touch. Failure to adhere
to these directions could result in severe personal injury. If this happens, sparks will occur
that can melt connection lugs, or other metal objects, and create the potential for fire.
Disconnect the positive battery cable of the vehicle before connecting fog lights.
These lights are not DOT approved for use on public roads. Always follow all local,
state and federal regulations regarding installation and use of these lights.
Read all instructions and warnings on any battery or automotive electrical systems
before working on vehicle.
Do not expose the battery or bare wires, switches or connections to rain or wet
conditions.
To avoid damage of cable and plug, never pull the cable to disconnect the Fog
Lights.
Always unplug the Fog Lights from their electrical connection and allow to cool com-
pletely before performing any inspection, maintenance, or cleaning procedures.
Repairs should be carried out only by a qualified technician.
An appropriate in-line switch and fuse are essential to help prevent fire in the event
of a short circuit. These components are not included in this kit and will need to be pro-
vided by the customer.
WARNING: This product contains or, when used, produces a chemical known to the
State of California to cause cancer and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq.)
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.