Filter
Top Products
Page 4 For technical questions, please call 1-800-444-3353. SKU 67498
between posts and mark the location for
the bolts on the truck bed.
Attaching the Side Rails Together
Figure 4
Left
Middle
Left
Back
larger bar sections together with the Bolt
Attach the Right Middle and Right Back
Attaching the Posts to the Side Rails
Figure 5
Small Top Bar
Large Bar
Assembled Rail
1. Lay one Post A and one Post B on the
ground at the approximate distance apart
as in step 2 under “Preparation” and lay
one assembled Rail section over the
cupped section near the top of the Posts
and the smaller bar sits on top of the
the Rail so the vertical supports are not
in the way of attaching the Posts.
Figure 6
Vertical Supports
Note: The vertical supports on the Rail
sections should be positioned so they
are on the inside of the framework. The
Posts can be positioned anywhere along
the Rails between the vertical supports.
Working with one Post at a time, straddle 2.
the large bottom bar of the Rail with the
holes on the Crossbeam Sockets with
the holes in the Post.
Secure the Crossbeam to the large 3.
Secure the small top bar to the top 4.
Repeat steps 1-4 above for the other 5.
assembled Rail section and remaining
Posts.
Double check the distances between the 6.
Posts and adjust their distances so they
step 2 under “Preparation”.
Optional Construction
with Bar over Cab
This unit can be assembled as a smaller
Rack by omitting the pieces positioned over
the Truck Cab, or it can be assembled as