Filter
Top Products
PAGE 5 OF 13
BT338_GPS_v2.0
BT-338 GPS
3. CHANGING THE BATTERY
1. Slide battery cover in the direction of the top of the GPS receiver to remove..
2. Use the pull tab to lift out Li-ion battery.
3. Replace battery making sure that the battery contact on the bottom side of battery touch the contacts
on the BT-338 within the battery compartment. (Pull tab should be facing upward and at the head or
top of the GPS receiver)
4. Slide battery cover on in the direction towards the bottom of the GPS receiver to replace it. (Note the
alignment tabs on the edges of the battery cover that need to mate properly with the main housing
body in order to slide shut).