Filter
Top Products
Black plate (22,1)
Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
6014443) - 2014 - CRC - 4/3/13
2-22 Keys, Doors, and Windows
2. Stop the liftgate movement at
the desired height by pressing
any button that operates the
power liftgate, or the touch pad.
Manually adjust the liftgate
position if required.
3. Press and hold the button on the
liftgate adjacent to the latch until
the turn signals flash and a beep
sounds to indicate that the new
setting is recorded.
When power opened with the
¾ mode selected, the liftgate stops
at the new set position.
If an audible and visual response is
not received when setting the
intermediate stop position then the
liftgate height is below the ¾ open
height minimum, approximately
1.52 m (5 ft). The liftgate cannot be
set below that minimum.
Manual Operation of Power
Liftgate
To change the liftgate to manual
operation, with the vehicle in
P (Park) for an automatic
transmission or Neutral for a
manual transmission, turn the
mode selector switch to OFF.
With the power liftgate disabled
and all of the doors unlocked, the
liftgate can be manually opened
and closed. Manual operation
of a vehicle with a power liftgate
requires more effort than a standard
non-power liftgate.
To open the liftgate, press the touch
pad under the liftgate handle and
lift. To close the liftgate, use the
pull cup. With the power liftgate
disabled, the liftgate electric latch
will still power latch once contact is
made with the striker. Always close
the liftgate before driving.
If
8 is pressed on the RKE
transmitter while power operation is
disabled, the turn signals will flash
and the liftgate will not move.
The liftgate has an electric latch.
If the battery is disconnected or has
low voltage, the liftgate will not
open. The liftgate will resume
operation when the battery is
reconnected and charged.