Filter
Top Products
Black plate (22,1)
Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
6014443) - 2014 - CRC - 4/3/13
7-22 Infotainment System
To use the MENU/SELECT knob:
Press the softkey under the Menu
tab to display a list of all Groups. To
change Groups, turn the MENU/
SELECT knob to highlight the
desired Group. Press the MENU/
SELECT knob to select it. Playback
begins from track 1 of the
highlighted Group.
Fast Forward and Rewind
s REV (Fast Reverse): Press to
reverse playback quickly within a
track. Sound is heard at a reduced
volume. Press once to change
playback to a speed of 2X. Each
successive press changes playback
to a speed of 4X, 10X, or 21X.
Press
r / j to resume normal
playback.
\ FWD (Fast Forward): Press to
advance playback quickly within a
track. Sound is heard at a reduced
volume. Press once to change
playback to a speed of 2X. Each
successive press changes playback
to a speed of 4X, 10X, or 21X.
Press
r / j to resume normal
playback.
Playing Tracks in Random Order
Press the softkey under the Shuffle
tab to begin random playback of all
songs in the current Group. Press
again to turn off random playback.
Stopping DVD Audio Playback
Press the softkey under the
c tab
to stop playback of the DVD audio
disc. “DVD PreStop” displays. Press
the
r / j button to resume playback
from where it was stopped.
Press the softkey under the
c tab
again while in DVD PreStop. “DVD
Stop” displays. Press the
r / j
button while in DVD Stop to begin
playback from the beginning of the
DVD audio disc.
Press the
r / j button during DVD
audio playback to pause or resume
playback.
Selecting DVD Audio Streams
Each DVD audio Group may contain
audio content that is encoded in one
or two formats. For example, a
particular Group may have both a
5.1 surround audio stream and a
2.0 stereo audio stream available.
Press the softkey under the Audio
tab to display the current audio
stream playing. “Audio Stream 1” or
“Audio Stream 2” briefly displays.
Press the softkey under the Audio
tab again to toggle between Audio
Stream 1 or Audio Stream 2
(if available).
Check the DSP settings to
determine if a 5.1 surround sound
audio stream is playing. See
Operation on page 7-3. Press the
DSP tab to see if the 5.1 + Normal
or 5.1 + Rear settings are available
for selection. If these settings are
available, Audio Stream 1 is playing.