To create a load floor release the panels from the
seatback by pushing forward on the latch. Then fold the
panels back to cover the rear seat footwell area.
To return the seat to the passenger position on a
extended model do the following:
1. Lift the floor load panels and latch them into
the seatback.
2. Lift the seatback up and push rearward all the way.
3. Lower the seat cushion until it latches
into position.
4. Pull forward on the seatback and up on
the seat cushion to make sure the seat is securely
in place.
On regular models make sure the head restraints are
returned to the upright position.
1-10