Filter
Top Products
Folding the Seatbacks
{CAUTION:
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure
it is locked.
Make sure that nothing is under or in front of the seat
and that the head restraints are completely lowered.
On Yukon models the rear seatbacks may be equipped
with rearward folding head restraints. When the
seatback is being folded down, the head restraint will
automatically fold rearward to allow a flat load floor
for cargo or entry to the third row seat (if equipped).
To fold, pull up on the
strap loop at the rear of
the seat cushion.
Then, pull the seat cushion
up and fold it forward.
After folding the seat cushion fully forward, pull the
seatback forward and fold the seatback down until it is
flat. If the seatback cannot fold flat because it
interferes with the cushion, try moving the front seat
forward and/or bring the front seatback more upright.
On the passenger side of the extended models, the lever
at the base of the seat must be turned rearward to
release the seatback.
1-9