Filter
Top Products
Getting to Know Your Corvette
12
Temperature Control: The driver-side
knob changes the temperature on the
driver’s and passenger’s side of the
vehicle. Turn the knob clockwise or
counterclockwise to manually increase
or decrease the temperature inside your
vehicle.
The passenger-side knob changes the
temperature on the passenger’s side of
the vehicle.
See Section 3 of your Owner Manual.
Defogging
OnStar
®
(if equipped)
The OnStar system provides in-vehicle
safety, security, and phone services,
available 24 hours a day, 7 days a
week. These services are easily
accessed through the three OnStar but-
tons in your vehicle.
CONVENIENCE FEATURES
To clear fog or frost from your wind-
shield, press the Windshield Defogger
button ( ). This mode directs most of
the air to the windshield. When operat-
ing, the Defog symbol appears on the
display.
Rear Window Defogger
To remove fog or frost from the rear
window, press the Rear Window
Defogger button ( ) to turn the rear
window defogger on. It will turn off
automatically or can be turned off by
pressing the button again.
The heated outside rearview mirrors
also will be cleared when is
pressed.
See Section 3 of your Owner Manual.
Manual Operation
Off:
Press the driver-side climate control
knob to turn off the climate control sys-
tem. This is the only setting that fully
shuts off the fan. The digital display will
show only the outside temperature.
(Recirculation): Press this button
to turn the Recirculation mode on or off.
When on, it keeps outside air from com-
ing in the vehicle.
Recirculation is not available when using
the Defog mode because outside air is
needed to reduce moisture inside the
vehicle.
A/C Off: Press this button to turn the
air conditioning system off.
For maximum cooling on hot days,
do the following:
1. Open the windows to let hot inside
air escape; then close them.
2. Select the Vent mode.
3. Select Recirculation mode.
4. Turn on the A/C.
5. Select the coolest temperature.
6. Select the highest fan speed.
(Fan): Press this button to man-
ually increase or decrease the fan
speed.
(Mode): Press this button to manual-
ly lock in the current air delivery setting
and to stop the automatic mode control.
To change the setting, press the Mode
button again and select one of the
following:
• Vent: This mode directs most of the
air to the instrument panel outlets.
• Bi-Level: This mode directs air to the
instrument panel outlets and the floor
outlets.
• Floor: This mode directs most of the
air to the floor outlets.