Filter
Top Products
5-23
Removing the Wheel Center Caps
To remove a center cap, use
the wrench to pry gently at
the notch. Don’t use a tool
that is narrower than the
wrench to pry at this notch.
Then pry off the cap.
Removing the Wheel Covers (If Equipped)
If your vehicle is equipped with wheel covers, be sure to
use a wheel wrench to begin the process of loosening the
plastic wheel nut caps.
Once you have
loosened the plastic
nut caps with the
wheel wrench, if
needed, you can
finish loosening them
with your fingers.
Then, using the flat end of the wheel wrench,
pry along the edge of the wheel cover until it
comes off. Be careful; the edge may be sharp.
Don’t try to remove the cover with your bare hands.