Filter
Top Products
www.garrett.com
16
Master Hunter
®
CX Plus Owner’s Manual
17
CONTROL FUNCTIONS - SIDE PANEL
It is recommended that you begin hunting with both
controls set at the Initial Setting (>) indicators.
1. FERROUS RANGE - Allows adjustment for the
elimination of targets in the iron range up to but not
including aluminum pulltabs. Targets located and
accepted in this range will cause your audio signal
to grow louder.
2. NON-FERROUS RANGE - Allows adjustment for
elimination of targets in the range of pulltabs through
aluminum screw caps.
Garrett’s Target Elimination controls permit you
to select the targets you desire. Furthermore, the
Multi-Range Discrimination System permits selec-
tion of these targets in both Ferrous and Non-Ferrous
ranges. The Ferrous control is adjustable from zero
through bottlecap rejection while the Non-Ferrous
control takes over at pulltab rejection and is adjust-
able through aluminum screw tops. Proper use of
the two controls will dramatically improve accuracy
by eliminating worthless targets in both the ferrous
and non-ferrous ranges and in accepting many kinds
of gold and silver rings, jewelry and coins.