Garrett Metal Detectors CX Plus Radar Detector User Manual


 
www.garrett.com
14
Master Hunter
®
CX Plus Owner’s Manual
15
pressed and held rmly, its Fast Track function is
activated. As you begin scanning with the search-
coil in a normal manner, ground balance adjustment
is quickly and automatically achieved. Repeat this
procedure at any time to achieve precise ground bal-
ance.
3. PINPOINT / DEPTH - Press and hold to activate
the pinpointing function of your Master Hunter CX
Plus after you have discovered a target. A com-
plete discussion of pinpointing can be found in this
owner’s manual. After you have pinpointed a target
and released this touchpad, the display will indicate
how far coin-sized targets lie beneath the bottom of
the searchcoil and the reading will be highly accurate
regardless of the size coil being used. This reading
holds for approximately three (3) seconds.
4. DISC - Press DISC (Discriminate) to return to the
Discriminate Mode when you have been operating in
the All Metal Mode. The CX Plus begins operating in
the Discriminate mode whenever it is turned on.
5. + and - - These two similar pads with arrowheads
(at extreme right of the console) are used to regulate
the Audio Threshold and Detection Depth (sensitiv-
ity). If either + or - is pressed, the sensitivity in the
current operating mode will be changed. To change
the audio threshold, press and hold the All Metal
touchpad while regulating the threshold by pressing
the + or - pad.
Special Note: Don’t ever worry about “damaging”
the circuitry of your CX Plus by adjustments that you
make. Just hold down the All Metal touchpad and
press the DISC touchpad to restore factory settings.