Filter
Top Products
StreetPilot 7200/7500 Owner’s Manual 43
cUstoMizinG yoUr streetPiLot
Guidance—turn on the vocal guidance prompts. Select
Speak Key Only to hear the voice prompts only when
you press the SPEAK key on the remote control.
Attention Tone—
turn on or off the attention tone
sounded before voice prompts.
Touch Screen Tone
—turn on or off the tone sounded
each time you touch the screen.
Keypress Tone—turn on or off the tone sounded each
time you press a button on the remote.
Speed Adjusted Volume
—select how much the volume
increases as your speed increases: Low, Medium, or
High. To manually control the volume, select Off.
Audio Jack
—select Headphones when using
headphones. Select Line Out if you are connecting to
the audio input of another device (like a car stereo), and
excessive audio noise is heard.
Conguring Video Input
The StreetPilot supports NTSC (North America) and
PAL (Australia) composite video input. From the Menu
page, touch Settings > General > Video Input.
Input Type
—select the video input type: DVD/video or
Backup Camera. For more information about setting up
the backup camera, see page 34.
Detection Response
—select how the StreetPilot
switches to the video. This setting changes to Reverse
Response when Backup Camera is selected.
Volume—opens the Adjust Volume Level page. See
page 41.
View Source—displays the video source.
NOTE: When you switch from the video input
to the navigation screens, the screen momentarily
turns black and then the navigation screens
appear. This is normal.